Relatively and symmetrically, the UTTE is an extremely attractive timepiece. The two new Arnold & …
Do you prefer for me to remind you what the greatest issue is really on watches with fully skeletonized dials and moves? It is you can often go through to your own skin and arm hair. Yes, these sexy-looking timepieces using skeletonized movements and dials can appear amazing in concept (and pictured independently), but place them onto your wrist at a real-world scenario and only those individuals with the most exquisite of wrists will not have a reason to complain at all. This is actually a common “item” which watch fans can and do complain about.So, to cure this situation and respond to the issue, Arnold & Son has performed a small experimentation with this new version of their Time Pyramid watch in steel at the version reference 1TPAS. S01A.C124S “Translucent Back” variant. This model will even outright replace the first version of the Arnold & Son Time Pyramid in steel using the traditionally transparent front and rear crystal.Arnold & Son did an wonderful job for this watch but gave it no special name – which was fairly lazy. “Time Pyramid Translucent Back” is the name that I’m giving it nearest entity Arnold & Son gets to a exceptional name (besides the mention amount) is “Time Pyramid Translucent-Grey Coated Sapphire Case Back” Ugh… Anyways, even without a proper title, the watch is still exactly what you want since the caseback is really just one-way mirror substance.
The case measures in at 44mm, will be available in rose gold, also is water-resistant around 30m. The dial is completely skeletonized with double accounts put against C?tes de Genève stripes, giving a nice contrast and extra symmetry. The time zone indicators, as with previous versions, differ with Arabic and Roman numerals from an increasingly popular smoked background. I feel that these add an eclectic touch to almost equal parts of this watch. Considering that the motion does contain independent time zone elements, each time zone is managed by its crown, or “ears” as many fans refer to them, at 3 and 9 o’clock. Each time zone is set with its individual crown, while the watch is wrapped solely by the crown at 3 o’clock. Overall, the aesthetic refinements to the dial and also the symmetry of the Arnold & Son DBG Skeleton watch will refresh and breathe new life into the Arnold & Son DBG. It manages to exhibit the complex and impressive details of a very complex timepiece without delving into the “too busy” class that many tend to fall into when handling such a complex endeavor. While I can definitely see a white gold or platinum alternative later on, I think that this is a welcome addition to the group, and one I would be eager to wear. 1DGAP. S10A.C120P will be limited to 30 bits and will carry a cost of $38,850 which is actually a couple million dollars less than what the initial DBG watch in gold cost.
The movement is just 4.4mm thick and also works at 3Hz (21,600bph) and suggests that the time at a subdial using the moments in a lower, smaller subsidiary dial. For the steel version of the Time Pyramid, Arnold & Son coats much of the motion bridges at “NAC Gray” for the darker look which contrasts nicely with the blue tones of their palms and screws in addition to the lighter silver-colored gears and wheels. Do not miss all the hand-decoration such as the chamfered and polished bridges. The general look is quite fine, and with all the newest manner of sapphire crystal caseback that the entire demonstration of the Arnold & Son Time Pyramid steel is better than ever.With that the hand-stitched black alligator strap, this Arnold & Son Time Pyramid Translucent Back watch looks fantastic on the wrist, particularly due to just how much of your wrist you can’t see. The extra element of treating the sapphire crystal caseback is little but really effective, and I can’t see people wanting to go back to totally clear sapphire crystals on fully skeletonized dial watches (unless they are working on very intriguing wrist tans). Cost for this reference 1TPAS. S01A.C124S Arnold & Son Time Pyramid watch is31,900. In 2013, Arnold & Son raised eyebrows with their Ultra-thin Tourbillon Escapement “UTTE” watch which, back then, was the planet’s thinnest tourbillon watch. The watch was only 8.34mm thick and placed the calibre A&S8200 which measures only 2.97mm thick. Even though it has since dropped the title of thinnest tourbillon see to the Bulgari Octo Finissimo Tourbillon (hands-on here), the UTTE still remains an impressive masterpiece.
This version was released for Baselworld 2017 and we shared our initial impressions here. Here, we will go hands-on together with the Arnold & Son DBG Skeleton and research what makes this view tick, besides, you know… the dual balances.When it comes to evaluating the significance of this watch, I consider it crucial to look at the brand’s history. Arnold & Son was founded in 1764 by John Arnold at London’s Strand. In the exact same year, he introduced a half-quarter repeater watch mounted inside a ring to King George III, which he followed four years later with a gold and enamel minute repeater fitted with jeweled pivot holes, bimetallic temperature compensation, along with a jeweled cylinder escapement. Arnold named that this watch the “No. 1,” starting a naming convention he would use for his most significant timepieces going forward.By 1772, an Arnold “No. 3” chronometer was aboard Captain Cook’s boat when he put out for his second voyage across the Pacific, and Arnold chronometers goes on to accompany many other significant voyages within these decades. His son, John Roger Arnold, started studying watchmaking beneath Abraham-Louis Breguet in 1792 and joined his father’s business four decades later. Breguet became a fantastic friend of John Arnold and the two collaborated on equilibrium layouts, the overcoil balance spring, along with the tourbillon, although Arnold died in 1799 before this notion could be accomplished. To mourn his passing, Breguet presented his son with all the very first tourbillon escapement mounted in an Arnold pocket chronometer, which also bears a personal inscription and is today exhibited in the British Museum in London.
At 12 o’clock is a day/night indicator for the GMT time and time, using matching skeletonized and stuffed palms to tell them apart. The bottom half of the indicator is darkened, which aids the visual representation of this “nighttime” portion of the disc. I really do want the Arnold & Son emblem had been found elsewhere though, as its place interrupting the moments track at 12 o’clock could make precise time-setting difficult. Another niggling issue I found was that the next hand counterweight closely emulates the appearance of the house time hands, which can occasionally cause a moment of confusion when you glance down and watch three palms pointing towards the dial. In an perfect world, I would have loved to see that the moment hands on each dial stretched only a tad further to properly reach the minute track, and the hour palms shortened a tad to not overlap the hour mark, but this is a minor aesthetic qualm which doesn’t impact utility.On the reverse side of this Arnold & Son DBG Skeleton, the bottom plate of this manufacture bore A&S1309 is shown. The motion is made of nickel silver (also known as German silver or Maillechort, an alloy of aluminum, nickel and zinc) which was rhodium-plated and decorated using C?tes de Genève. The wheels are satin-finished and supply a contrasting three dimensional feel to the base plate, and between the chamfered edges of these bridges, the golden gear train can be seen. The motion is hand wound obviously, which contributes to its thinness at a mere 3.9mm. It features 42 stones and provides a 40 hour power reserve while the twin accounts oscillate at 21,600vph, or 3Hz. This is definitely a highly refined motion, but compared to the thickness of detail offered by this skeletonized dial, the reverse side of this movement almost feels like a letdown.
The case measures in at 44mm, will probably be available in rose gold, also is water-resistant around 30m. The dial is totally skeletonized with double accounts set against C?tes de Genève stripes, giving a wonderful contrast and extra symmetry. The time zone signs, as with previous models, differ with Arabic and Roman numerals against an increasingly popular smoked background. I believe these add an eclectic touch to virtually equal parts of this watch. Considering that the motion does feature separate time zone elements, each time zone is handled by its own crown, or “ears” as many enthusiasts refer to them, at 3 and 9 o’clock. Each time zone is set with its individual crown, while the watch is wound solely by the crown at 3 o’clock. It manages to exhibit the intricate and impressive details of quite a complex timepiece without delving into the “too busy” category that many tend to fall into if tackling such a intricate endeavor. While I can definitely find a white gold or platinum alternative later on, I think that this is a welcome addition to the collection, and one I would be eager to wear. 1DGAP. S10A.C120P will be limited to 30 pieces and will take a cost of $38,850 that is really a few million dollars less than what the initial DBG watch in gold cost.
The movement is merely 4.4mm thick and works at 3Hz (21,600bph) and suggests the time at a subdial using the moments in a lower, smaller subsidiary dial. For the steel edition of this Time Pyramid, Arnold & Son coats much of the motion bridges in “NAC Gray” for its darker appearance which contrasts well with the blue tones of their hands and screws in addition to the lighter silver-colored gears and wheels. Don’t miss all the hand-decoration like the chamfered and polished bridges. The overall look is quite nice, and with all the newest style of sapphire crystal caseback that the entire demonstration of this Arnold & Son Time Pyramid steel is better than ever.With the hand-stitched black alligator strap, this Arnold & Son Time Pyramid Translucent Back watch looks fantastic on the wrist, particularly because of how much of your wrist you can not see. The extra element of treating the sapphire crystal caseback is little but very effective, and I can not see people needing to return to completely clear sapphire crystals on fully skeletonized dial watches (unless they are working on very interesting wrist tans). Price for this reference 1TPAS. S01A.C124S Arnold & Son Time Pyramid watch is $31,900. In 2013, Arnold & Son raised eyebrows with their Ultra-thin Tourbillon Escapement “UTTE” watch that, back then, was the world’s thinnest tourbillon watch. The opinion was only 8.34mm thick and housed the calibre A&S8200 which measures only 2.97mm thick.
|Brand||Arnold & Son|
|Bracelet material||Crocodile skin|
|Location||United States of America, Arizona, SCOTTSDALE|
|Case diameter||40 mm|
|Bracelet material||Crocodile skin|
|Luminescent Hands, Screw-Down Crown, Luminous indexes|
Report suspicious offer
|Ceritified Pre-Owned Arnold & Son Timekeeper GMT wristwatch, reference number AS1006R. The watch has stainless steel round case, fixed smooth stainless steel bezel, black and grey dial with luminous stick markers. It has automatic movement with hours, minutes, seconds, date and triple time zone functions, sapphire crystal, brown alligator strap with stainless steel tang buckle. Complete with Box and Papers.|